You can lock the buttons on the projector to prevent anyone from using the projector. You can also lock the zoom, focus, and lens shift
You can temporarily turn off the projected image of Epson EH-LS12000B by following this guide. Shutting Off the Image Temporarily Steps 1. Press the [Blank]
You can use the projector’s Frame Interpolation feature to smooth fastmoving video by comparing consecutive image frames and inserting an intermediate image frame between them.
You can adjust the brightness of dark and bright areas by adjusting the Offset and Gain settings for individual image colors. Adjusting the RGB Offset
You can correct differences in projected image colors that occur between different image sources by adjusting the Gamma setting. Steps for Adjusting the Gamma Turn
You can set the overall color tone by adjusting the Color Temp of Epson EH-LS12000B. setting if the image is too bluish or reddish. Adjusting
You can turn on Dynamic Contrast to automatically optimize the image luminance of Epson EH-LS12000B. This improves the image contrast based on the brightness of
You can adjust the brightness of your Epson EH-LS12000B projector’s light source by following the steps below. Adjusting the Light Source Brightness 1. Turn on
You can fine-tune various aspects of the quality of your projected images including the contrast ratio, keep on reading to know how to do it.
The projector offers different color modes to provide optimum brightness, contrast, and color for a variety of viewing environments and image types. You can select
This tip will show you the detailed steps to set up Epson EH-LS12000B Projector’s Color Mode. Changing the Color Mode You can change the projector’s
You can select the following image aspect ratios, depending on the input signal from your image source. Available Image Aspect Ratios Aspect mode Description Auto
The projector can display images in different width-to-height ratios called aspect ratios. Normally, the input signal from your video source determines the image’s aspect ratio.