If an image flicker appears on the NEC NP64 projector, you can try the following solution.

1. Change [FAN MODE] from [HIGH ALTITUDE] mode to [Auto] Mode when using the projector at altitudes approximately 5000 feet/1500 meters or lower.

2. Using the projector at altitudes less than approximately 5000 feet/1500 meters and setting it to [HIGH ALTITUDE] can cause the lamp to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO].

3. Immediately after turning on the projector, a screen flicker may occur. This is normal. Wait for 3 to 5 minutes until the lamp lighting is stabilized.

4. Press the AUTO ADJ button on the NEC NP64 projector or the remote control.

5. Reset the projector if all the solutions above can’t fix the image flicker on the NEC NP64 Projector Image Flicker.

Related Posts
NEC NP64 Projector Remote Control Doesn’t Work Troubleshooting
NEC NP64 Projector Won’t Turn On Troubleshooting
NEC NP64 Projector Lamp Replacement Guide
How to Invert NEC Projector Image?
NEC NP64 Projector Lamp Replacement Guide