You can display the control window of the Sony VPL-XW7000 Projector with a web browser and configure the network settings.

  1. Connect the projector and smartphone/computer to a hub or router using LAN cables (straight) (not supplied) or Wi-Fi.
  2. Press the MENU button.
  3. Select  [Setup], then set [Web Control UI] to [On].
  4. Select  [Installation], then configure the network settings under [Network Setting].For details on the setting method, see the “Menu Operation: Network Setting ” page.
  5. Start a web browser, enter the following into the address field, then press the Enter key. http://xxx.xxx.xxx.xxx(xxx.xxx.xxx.xxx: IP address of the projector)
    When connecting by the IPv6 address
    http://[xxxx:xxxx:- xxxx]The IP address of the projector can be confirmed from [Network Setting] in the  [Installation] menu.The authentication window is displayed in the browser.
    When you access for the first time, enter “root” as the user name and “Projector” as the password in the authentication window.
    When you log in for the first time, the window that prompts you to change the password is displayed. Follow the instructions on the screen to change the password.

    You can change the password from [Password] in the [Advanced Settings] page.

    When you change the password, enter a new password.The password should be 8 to 16 characters that includes both alphabet and numeric characters. Alphabets are case-sensitive.The initial password “Projector” cannot be set as the new password.
Sony VPL-HW79

Read more:

Sony VPL-XW6000 Projector Remote not Working Solution

Sony VPL-XW6000 Projector Trigger Teminal Setting Guide

Lens Control Setting Tip for Sony VPL-XW6000 Projector

How to Flip Image of Sony VPL-XW6000 Projector?

How to Put on Sony VPL-XW6000 Projector Menu Settings Lock?

Leave a Reply

Your email address will not be published.