Black Friday has left two Google TV laser projectors sitting $780 apart on Amazon. Dangbei’s MP1 Max dropped to $1,119 on November 19, down from a $1,599 list price, and Anker’s Nebula X1 has been $1,899 since November 13, against a $2,999 list price. Both are 4K DLP machines with laser light, licensed Netflix and a built-in stand, and both are deals by any reasonable standard. They are not, though, built for the same buyer.

Both prices are low for these two. Our Amazon log has the Nebula X1 at $2,299 in late August and $2,399 on November 6, and Anker’s own US store still listed it at $2,999 earlier this week. Amazon’s deal is scheduled to run until December 1. The MP1 Max sold for $1,299 in September and $1,599 as recently as November 9, so $1,119 is the lowest we have recorded for it.

The full spec table sits on our MP1 Max vs Nebula X1 comparison page. What follows is what those numbers mean once a projector is actually in a room.

Brightness: closer than the numbers look

Dangbei rates the MP1 Max at 3,100 ISO lumens; Anker rates the X1 at 3,500 ANSI lumens. ISO 21118 and ANSI are different measurement methods, so the 400-lumen gap on paper should not be read as a 13 percent brightness advantage. Neither company publishes figures to the other’s standard, and we would not put a number on the real difference without measuring both in the same room. In practice, both clear the bar for a 100-inch picture with some ambient light, which is what most buyers in this price range care about.

The light sources differ. The MP1 Max mixes three lasers with an LED; the X1 uses a pure red-green-blue triple laser. Both quote 110 percent of BT.2020, which tells you the color gamut is wide on both, not which one renders a skin tone better.

Where the X1 earns its extra $780

The X1’s clearest advantage is its lens. It has a 0.9 to 1.5:1 optical zoom built around a 14-element glass lens, which means you can change the picture size without moving the projector and without the digital scaling that softens detail. The MP1 Max has a fixed 1.20:1 throw, so screen size is set by distance. If the projector has to sit on a particular shelf or a specific spot in the ceiling, that zoom range is genuinely useful.

The X1 also supports Dolby Vision. The MP1 Max handles HDR10+, HDR10 and HLG but not Dolby Vision, so anyone whose library leans on Dolby Vision streams gets a format match on the Anker. Anker also offers optional wireless satellite speakers that turn the X1 into a 4.1.2 system, plus a 25-degree auto-tilting gimbal, liquid cooling and a carry handle.

Where the MP1 Max pulls ahead

For a lot of rooms, though, those advantages matter less than the price gap. $780 is the cost of a good 100-inch ambient-light-rejecting screen with money left over, or a decent soundbar, and in a living room a better screen usually improves the picture more than a zoom lens does.

The MP1 Max is also the quieter and lighter machine: 24 dB against 26 dB in each brand’s specs, and 5.6 kg against 6.1 kg. Its integrated stand rotates a full 360 degrees and tilts up to 135, enough to project on the ceiling. It adds HDR10+, which the X1’s spec sheet does not list, and Blu-ray 3D. Two 12W speakers support Dolby Audio and DTS:X, and there are two HDMI 2.1 inputs, one with eARC. Both machines run Google TV with licensed Netflix, so streaming apps are a wash.

What owners say

The Amazon review summaries for the two machines are encouraging. MP1 Max buyers keep coming back to picture quality, brightness and how quickly it sets up; several call it the best projector they could find under $2,000, one points to sharp focus right into the corners, and another describes it as whisper quiet. Connection experiences are mixed. It holds 4.4 stars from 97 ratings.

X1 owners are just as warm about the picture. One describes a bright, sharp 90-inch image, and many mention value, easy setup and sound that fills a small room. Color and responsiveness get mixed feedback, with some reporting visible rainbow artifacts (a trait some viewers notice on single-chip DLP projectors of every brand) and software that occasionally glitches. It holds 4.5 stars from 121 ratings.

The split

The X1 is for buyers who need flexible placement through optical zoom, want Dolby Vision, or plan to build a wireless surround system around the projector. Those are real reasons, and at $1,899 it is $1,100 below its list price.

For a fixed spot in a living room or a bedroom ceiling, the MP1 Max delivers a very similar experience: 4K laser, licensed Netflix, a built-in stand and quieter running, for $1,119. It also leaves room in the budget for a screen. At these Black Friday prices, that is the better buy for most people.

If even $1,119 is a stretch, Dangbei’s DBOX02 drops to $899 this week. It gives up some brightness and the rotating stand, but keeps 4K laser, Google TV with licensed Netflix and InstanPro automatic setup.

Living-room home theater pick
Dangbei DBOX02
2,450 ISO lumens, 4K laser, Google TV with officially licensed Netflix, and InstanPro auto setup. $899 on Amazon through November 30.

See it on Amazon