Two projectors, the same brightness number on the box, and a $100 gap between them. The Dangbei MP1 Max and the XGIMI Horizon S Max both quote 3,100 ISO lumens, both pair a laser light source with LED, and both run Google TV. On paper they look interchangeable. Spend a little time with the spec sheets, though, and they split into two fairly different machines.
Quick Spec Comparison
| Dangbei MP1 Max | XGIMI Horizon S Max | |
|---|---|---|
| Brightness | 3,100 ISO lumens | 3,100 ISO lumens |
| Light source | Triple laser + LED hybrid | Dual Light 2.0 (tri-color laser + LED) |
| Resolution | 4K UHD (pixel shift, 0.47″ DLP) | 4K UHD (pixel shift, 0.47″ DLP) |
| HDR | HDR10+, HLG, 110% BT.2020 | Dolby Vision, HDR10, IMAX Enhanced |
| Max image | 300 inches | 200 inches |
| Audio | 2 × 12W, Dolby Audio + DTS:X | 2 × 12W Harman Kardon |
| Light source life | 30,000 hours | 20,000 hours |
| Noise | 24 dB | 28 dB |
| Weight | 5.6 kg | 4.8 kg |
| MSRP | $1,999 | $1,899 |
Picture: BT.2020 Coverage vs Dolby Vision
The MP1 Max leans on raw color volume. Dangbei quotes 110% BT.2020 coverage from its triple-laser array, which is about as wide as consumer projection currently gets. Reds and greens that look slightly washed out on lamp or single-laser models come through with noticeably more punch, and HDR10+ handles dynamic metadata on supported content.
XGIMI plays a different card: format support. The Horizon S Max is one of the few lifestyle projectors at this price with Dolby Vision and IMAX Enhanced certification. If your library lives on Netflix and Disney+, where Dolby Vision masters are everywhere, that certification does real work — tone mapping is handled for you, scene by scene, without manual HDR fiddling.
Our take: for streaming-first users the Horizon S Max’s Dolby Vision support is the more useful advantage in practice. For users who care about color saturation on a big blank wall, the MP1 Max’s wider gamut wins.
Placement and Screen Size
Both projectors sit on integrated gimbal stands and both run full auto setup — keystone, focus, obstacle avoidance. The practical difference is ceiling: Dangbei rates the MP1 Max to 300 inches, XGIMI stops the Horizon S Max at 200. Few living rooms will push past 150 inches anyway, but if you are projecting across a garage wall or backyard screen, the extra headroom matters. The MP1 Max is also the quieter machine on paper, 24 dB against 28 dB, which is audible in a silent room during dark scenes.
Living With Them
Both run Google TV with licensed Netflix, so day-to-day use is close to identical — same launcher, same apps, same voice remote. The Horizon S Max is nearly a kilogram lighter and a bit more compact, easier to shelve or carry between rooms. The MP1 Max’s 30,000-hour light source rating outlasts XGIMI’s 20,000 hours, though at four hours a day either figure means over a decade of use.
Verdict
There is no blowout here. Buy the Horizon S Max if Dolby Vision content is the center of your viewing and you value the slightly lower price and weight. Buy the MP1 Max if you want the widest color gamut in the class, quieter operation, and room to grow past 200 inches. Both are strong picks in the 2025-2026 hybrid-laser wave; the decision comes down to your content library more than to hardware quality.
For the full side-by-side spec sheet, see our Dangbei MP1 Max vs XGIMI Horizon S Max comparison page.
