Puppy Cube is a cute projector that supports touch control. If you come across a touch control failure, you can check the following items for troubleshooting.

Puppy Cube

In vertical mode:

1. Make sure the Puppy Cube projector is placed on a clean and flat surface.

2. Do not place any objects in the projection area.

3. The projection area must not be near strong light sources.

4. Make sure that the projection window and the bottom of the projector (indicated in red in the figure below) are clean and unobstructed.

5. The above conditions affect the accuracy of touch control.

Puppy Cube Touch Control Failure Troubleshooting

In horizontal mode:

1. Make sure the base of the Puppy Cube projector is placed close to the wall or projection screen.

2. Make sure the “System Settings”->”Projection Settings”->”Wall Touch Control” function is enabled.

3. Do not place any objects in the projection area.

4. The projection area must not be near strong light sources.

5. Make sure that the projection window and the bottom of the projector (indicated in red in the figure below) are clean and unobstructed.

6. The above conditions affect the accuracy of touch control.

Related Posts
Puppy Hachi Infinite M1 Touch Screen Failure Troubleshooting
Puppy Hachi Infinite M1 Remote Control Pairing Method
Puppy Hachi Infinite M1 Screen Mirroring Guide
Puppy Hachi Infinite M1 Factory Default Restore Guide