XGIMI has made firmware 1.7.269 for the HORIZON 30 Ultra Max available as an optional USB install after color accuracy feedback, with no changelog and no date for the OTA release.
XGIMI has released new firmware for the HORIZON 30 Ultra Max nine days after the projector went on general sale in the US, and it is asking most owners not to install it. In a post on its US site dated November 20, the company says version 1.7.269 is available as an optional manual update, loaded from a USB drive. It follows feedback from what XGIMI calls a small number of users who are particularly sensitive to color accuracy and picture quality. Everyone else is advised to stay on their current firmware and wait for an over-the-air release. XGIMI gives no date for that.
The post says XGIMI’s product and R&D teams reviewed the reports, ran further tests and kept working on what it calls relevant improvements. It doesn’t say what those improvements are. There is no changelog, no list of picture modes affected and no before-and-after measurements. Owners are told the build exists, where to download it and what can go wrong.
The risk section is longer than the explanation. XGIMI warns that a wrong procedure, a power cut during installation or an incompatible file may cause the projector to malfunction. It recommends the update only for people who have installed firmware from USB before and understand the risks. The package is for the Ultra Max only, and the company says it must not be loaded on any other XGIMI model. That includes the HORIZON 30 Pro and HORIZON 30 Max, which are part of the same range.
The download link itself gives away two details. The file sits in a folder stamped November 9, which is two days before the Ultra Max moved from pre-order to regular sale in the US and eleven days before XGIMI offered it to the public. The path also names the MediaTek MT9679 Google TV platform, which matches the chipset on XGIMI’s spec sheet. So the fix was built before most buyers had a unit, then held back for validation. XGIMI says that validation is still going on, and the wider OTA release will come once it is finished.
XGIMI doesn’t name the complaints, but the published lab tests point to a few likely ones. Netzwelt’s review got 5,770 lumens out of the Ultra Max in its brightest mode, with a strong green cast, and 4,440 lumens once the color was corrected. Belgian reviewer Laurent Willen measured an average Delta E of 2.50 to 2.73 in Filmmaker mode with SDR, which is good for an uncalibrated projector, but 3.3 to 3.9 with HDR. He also found the white point drifting as the iris closed, with SDR white Delta E rising from 4.49 at iris step 4 to 6.56 at step 5. We set the two tests side by side in our report on the 1,300-lumen gap between them. Willen said then that his conclusions rested on firmware 0.7.26, which he described as close to final but not final.
Willen updated his review on November 21 with a separate finding. He has run firmware 0.8.276 on the HORIZON 30 Pro and says the high-pitched noise from the XPR pixel-shifting module has almost completely disappeared. That noise was the one hardware complaint both labs shared, as we noted in our coverage of the Netzwelt test. Willen expects the same fix to reach the Ultra Max. XGIMI’s post mentions only color accuracy and picture quality, so it isn’t clear whether 1.7.269 changes the noise as well.
Firmware updates in the first weeks after launch are routine for laser projectors. Laser drive levels, tone mapping and iris behaviour are all set in software. What is unusual here is the delivery. XGIMI is offering the build to anyone who wants it, with a manual USB install, while telling most owners to leave it alone. For an owner with a meter and a calibration workflow, that is useful, because they can test the new build now and go back to the forums with numbers. For everyone else it confirms that the Ultra Max’s picture tuning is still being worked on.
It also means the published measurements are no longer the last word. Both lab tests were run on earlier builds, and neither has been repeated on 1.7.269. If the update moves color accuracy, it could also move calibrated brightness, since the two are linked on a triple-laser light engine. The 4,440 and 3,126 lumen figures now carry a firmware caveat until someone measures again.
The timing matters because this is the week the projector is cheapest. XGIMI’s US store listed the Ultra Max at $2,999 on November 21, down from $3,499, in a Black Friday sale that runs through November 30. The HORIZON 30 Pro is $1,899 and the HORIZON 30 Max $2,499 on the same store. The JMGO IRIS Ultra Max, the closest rival, was $3,299 on JMGO’s global store a week ago and is also $2,999 now. Anyone buying the HORIZON 30 Ultra Max at that price gets a projector with a picture update already built and waiting, and no public record yet of what that update changes.